plastic hinge
英 [ˈplæstɪk hɪndʒ]
美 [ˈplæstɪk hɪndʒ]
网络 塑性铰; 塑胶铰链; 塑性铰的形成; 塑性化
双语例句
- Quasi-Static Cyclic Tests and Plastic Hinge Analysis of RC Structural Walls
钢筋混凝土墙准静力循环试验和塑性铰分析 - The Property and Formation of the Plastic Hinge in Rotary Forging and Upsetting Process of Ring Billet Cutting and Precision Form of Helical Vane of Shearer Drum
摆辗镦粗工艺过程中塑性铰形成与特性研究采煤机滚筒螺旋叶片的下料及辗压成形 - Experimental study on the seismic behavior of RC column with rubber layer built in its plastic hinge
塑性铰区埋入高阻尼隔震橡胶后RC柱抗震性能的试验研究 - Study on Failure Mechanism of Reinforced Concrete Frame Structure's Plastic Hinge by Rare Earthquake Action
大震下钢筋混凝土框架结构塑性铰破坏机制研究 - Seismic damage evaluation of RC bridge columns based on plastic hinge model
基于塑性铰模型的钢筋混凝土桥墩地震损伤评价 - Various methods, which take axial force in the chord into account, used for the calculation of ultimate moment along an oblique plastic hinge line have been investigated and compared.
为了计算在轴向压力作用下沿倾斜塑性铰线的极限弯矩，研究者们提出了各种理论模型。该文对这些模型进行了分析和对比。 - Plastic hinge rotation-based design method of shear wall's boundary elements
基于塑性铰转角需求的剪力墙边缘构件设计方法 - Experimental research on seismic performance of high strength concrete circular column confined with carbon fiber sheets at plastic hinge zone
塑性铰区碳纤维约束高强混凝土圆柱抗震性能的试验研究 - It is shown that the secondary moment can facilitate the moment redistribution when the rotational capacity of plastic hinge is not enough.
从理论上证明了预应力次弯矩在塑性铰转动能力不够时能提高连续梁弯矩调幅能力的这一观点。 - The results of the cyclic loads test show that the welded-cover-plates steel frame rigid joint has good ductile performance and plastic hinge could appear in the expectant place.
针对钢框架梁柱栓焊混合刚性节点易出现的焊缝脆性破坏形式及其机理，对节点构造设计提出了改进意见，即在节点位置加焊楔形盖板。 - The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method.
用样条有限条塑性铰法分析了板梁的极限荷载。 - By summarizing domestic actual anti-seismic design method, steel of high-performance for anti-seismic is needed to achieve beam plastic hinge collapse mechanism which is required in the code.
通过对我国现行抗震设计方法的简要概述，得出为了实现规范要求的钢框架梁铰倒塌机制，需要使用抗震性能好的钢材。 - Investigate plastic behavior of the bridge with plastic hinge element;
通过引入塑性铰单元，分析了处于弹塑性状态下桥梁的地震反应。 - The realization of the thinking of seismic conceptual design and rational plastic hinge mechanism needs further study.
因此，对巨型框架结构抗震概念设计思想和塑性耗能机制的实现，还有待于进一步的研究。 - Ductility and Plastic Hinge of the Reinforced Concrete Frames
钢筋混凝土框架单元的延性和塑性铰性能 - The principal of the one-order and second-order analysis is summarized with the stress on the advanced plastic hinge analysis method.
阐述了二阶分析和塑性分析的一般原理和方法，详细介绍了高等分析中精化塑性铰方法的基本理论。 - With the help of plastic hinge theory and collapse theory, the formulas for calculating strength failure load and the method for computing collapse load were established respectively.
分别利用塑性铰理论和压溃理讨论了强度计算问题，提出了强度承载能力计算公式和压溃荷载计算方法。 - If the plastic hinge first appears in column, beam and joint will gum the same protection.
柱先出现塑性铰，则梁和节点得到某种保护； - The deformation, failure condition and ultimate bearing capacity of the plates with loading at its center, edge and corner have been presented. The results are compared and discussed with those from the plastic hinge theory and thin plate theory.
文中给出了载荷位于板中、板边、板角时的板体变形情况和破坏状况以及极限承载能力，并与塑性铰线理论、弹性薄板理论进行了比较和分析。 - Failure model II: only one group of plastic hinge was formed in tensional zone;
模式在结点域受拉区形成一组塑性铰； - The shear rigidity of plastic hinge in pole unit model is made certain on the truss model.
根据桁架模型确定单元塑性铰区域的抗剪刚度； - This paper discusses the selection of calculation model, the position of plastic hinge appearance, the impact of different loading patterns and the effect of new and old concrete design specification upon Push-over analysis results in the reinforced concrete frame structure Push-over analysis and advances some benefit suggestions.
对钢筋混凝土框架结构Push-over分析中计算模型的选择、塑性铰出现的位置、不同加载模式的影响以及新旧混凝土设计规范对Push-over分析结果的影响等进行了探讨，提出了一些有益的建议。 - Using the concept of plastic hinge, the average unit pressure and squash condition are researched with the theory of plane strain and energy method. So, the stable rolling condition of hollow workpiece rolling by cross wedge rolling is presented.
引入塑性铰概念，用平面应变理论和能量法研究了楔横轧空心件的平均单位正压力和压扁条件，并推导了楔横轧空心件的稳定轧制条件。 - Then he analyzes the sequence of plastic hinge generated and the weak position of the structure.
然后分析塑性铰产生顺序，结构的薄弱位置，并对三个模型的抗震性能进行了对比分析。 - One-dimensional components ( such as column beam and support) use fiber bundle model or plastic hinge model, two dimension components ( shear wall and slab) use the fiber bundle model, shell element damage model, elastic-plastic wall model or layered shell model.
梁柱撑等一维构件采用纤维束模型或塑性铰模型，剪力墙和楼板等二维构件采用纤维束模型、壳元损伤模型、弹塑性墙元模型或分层壳模型。 - Finally, based on the frame and connection separately, the factors which affect plastic hinge moving away from the connection are analyzed; the suggestion to use and design this kind of structure form is put forward.
最后，分别从框架和节点出发，分析了影响结构塑性铰外移的因素，对这类结构形式的使用和设计提出了建议。 - A three-dimensional beam element, which based on stability functions of beam-column theory and refined plastic hinge model, has been developed.
本论文建立了基于梁柱理论稳定函数和精细塑性铰模型的空间梁单元。 - The stress-strain relation, strain-curvature relation and plastic hinge model are introduced to construct the target displacement function.
主要介绍了采用的材料本构关系，材料应变与截面曲率的关系，塑性铰模型以及推导求解目标位移的方程。 - Distribution and development of plastic hinge for isolated structure under rare earthquake was analyzed.
分析了隔震结构在罕遇地震作用下的塑性铰分布及塑性开展情况。 - However, plastic hinge is often seen as a section and neglected the impact of the plastic hinge length.
然而，人们往往把塑性铰看作一个截面，忽视了塑性铰长度对结构能量耗散的影响。